1.4 Measurement Flowchart
22
You can start and stop recording either manually or using real-time control. In either case, repeat record-
ing can be used.
To start a new recording session after recording has ended, press the DA
TA RESET key, set the instru-
ment to [Se
tting] mode, and then press the START/STOP key. (Note that pressing the DATA RESET key
will erase the displayed measurement data.)
Start and Stop Recording
Manual Real-time control
Start
Press . Press to start recording at the set time and date.
Stop
Press to stop
recording.
Stops automatically at the specified stop time.
Press the to force stop.
Notes See: "Time Start" (p.78)
Repeated
recording
Recording is performed at the specified interva
l (once a week or once a day), and files
containing measurement data are created at the specified interval. Repeated recording
can be used to record for up to 55 weeks (approx. 1 year).
See: "Repeat Record" (p.79)
Relationship between the operation status and key operations
[Setting] [Recording]
[Analyzing]
Start
recording
Stop
recording
Revert to [Setting] mode
Set
Do not remove the SD memory card while recording or analyzing data. Doing so
may cause data on the card to be corrupted.
To Next Page
Loading...
