Hioki PQ3198 - Using the EVENT Screen

8.1 Using the EVENT screen
140
Pressing the DF1 key on the [EVENT] screen displays the event list screen.
Screen operation is limited depending on the in
strument's internal operating
state.
8.1 Using the EVENT screen
[EVENT] screen
Event
List
About screen configuration (p.28)
The screen shown varies with the instrument's internal operating
state.
Internal oper-
ating state
Display update
[Setting] None
[Recording]
After each event
[Analyzing] Stop
Relationship between
instrument status and key
operation
When you want to start record-
ing, but does not
work because the instrument
is i
n [Analyzing] mode
When you want to change
settings in [Recording] or
[Analyzing] mode
In both cases, all displayed measurement data will be deleted.
[Setting]
[Recording] [Analyzing]
Start
recording
Stop
recording
Revert to [Setting] mode
Set
Return to [Setting] mode
from [Analyzing] mode
[Recording]
Start
recording
[Setting]
In [Recording]
mode:
Stop recording Revert to [Setting] mode
[Setting]
In [Analyzing]
mode:
Revert to [Setting] mode
HIOKI PQ3198A961-02