Hioki PQ3198 - Page 130

7.3 Displaying detailed trends
124
You can read the value above the cursor and the time on the time series graph.
Reading the value above the cursor (Cursor measurements)
[Cursor]
Move the vertical
cursor left and
right to read the
display value.
Cursor color
Red: CH1
Yellow: CH2
Blue: CH3
Cursor
Cursor time
Cursor value
Left:
Maximum
value
Right:
Minimum
value
• When the TIME PLOT interval is set to 150 or 180 cycles, the time is shown in ms
units.
• The time displayed during cursor measurement is based on the CH1 voltage (U1).
The event time shown on the event list and the time displayed during cursor mea-
surement may not agree.
HIOKI PQ3198A961-02