13.3 Screen Specifications
224
(4) Inter-harmonics trend graph display
Displayed screens 1-screen display
Display update rate during
measurement
Every TIME PLOT interval
Displayed content Time series graph of maximum, minimum, and average values for up to 6 items
Additional display Event occurrence point display function
Event jump function Allows details for specified event to be analyzed on [VIEW] screen.
Time-series graph cursors Yes
(5) ΔV10 flicker graph display (when flicker is set to ΔV10)
Displayed content Time series graph of ΔV10 (instantaneous value)
(simultaneous display for all measurement channels)
Time-series graph cursors Yes
Constraints No display for 400 Hz measurement
(6) ΔV10 flicker list display (when flicker is set to ΔV10)
Display refresh rate Every 1 min (ΔV10 overall maximum value), every 1 hour (others)
Displayed content ΔV10 1-hour average value, ΔV10 1-hour maximum value, ΔV10 1-hour fourth-largest value, ΔV10
overall maximum value
Display selection CH1 to CH3 (varies with connection)
Constraints No display for 400 Hz measurement
(7) IEC flicker graph display (when flicker is set to IEC [Pst, Plt])
Displayed content Time series graph of Pst and Plt values
Time-series graph cursors Yes
Constraints No display for 400 Hz measurement
(8) IEC flicker list display (when flicker is set to IEC [Pst, Plt])
Display refresh rate Each time Pst is updated
Displayed content Pst and Plt values
Constraints No display for 400 Hz measurement
To Next Page
Loading...
