Introduction
3
Accuracy
We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt. (digit) values, with
the following meanings:
Others
(p. )
Indicates the location of reference information.
Indicates quick references for operation and remedies for troubleshooting.
*
Additional information is presented below.
[ ] Screen labels such as menu items, se
tting items, dialog titles and buttons are indicated by
square brackets [ ].
CURSOR
(Bold character)
Bold characters within the text indicate operating key labels.
Windows
Unless otherwise specified, "Windows" represents Windows XP, Windows Vista, or Windows 7,
Windows 8, Windows 10.
f.s.
(maximum display value
or scale length):
The maximum displayable value or scale length. This is usually the name
of the
currently selected range.
rdg.
(reading or displayed
value):
The value currently being measured and indicated on the measuring in-
strument.
dgt.
(resolution):
The smallest displayable unit on a digital measuring instrument
, i.e., the
input value that causes the digital display to show a "1" as the least-signif-
icant digit.
To Next Page
Loading...
