Hirschmann RS20 User Manual

Synchronizing the System Time in the
Network
102
7.2 SNTP
Basic Configuration
Release 6.0 07/2010
7.2.3 Configuring SNTP
 Select the Time:SNTP dialog.
X Operation
 In this frame you switch the SNTP function on/off globally.
X SNTP Status
 The “Status message” displays statuses of the SNTP client as
one or more test messages. Possible messages:
Local system clock is synchronized; An SNTP loop
has occurred; General error; Synchronized one
time; Client deactivated; Server 1 is not
synchronized; Server 1 has incorrect protocol
version; Server 1 not responding; Server 2 is
not synchronized; Server 2 has incorrect
protocol version; Server 2 not responding.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16