Hirschmann RS20 User Manual

Loading Software Updates
Basic Configuration
Release 6.0 07/2010
4.1 Loading the Software manually
from the ACA
67
 Test stored images in flash memory
 Select 3 to check whether the images of the software stored in the
flash memory contain valid codes.
 Test stored images in USB memory
 Select 4, to check whether the images of the software stored in the
ACA 21-USB contain valid codes.
 Apply and store selection
 Select 5 to confirm the software selection and to save it.
 Cancel selection
 Select 6 to leave this dialog without making any changes.
4.1.2 Starting the software
This menu item (Start Selected Operating System) of the system monitor
allows you to start the software selected.
4.1.3 Performing a cold start
This menu item (End (reset and reboot)) of the system monitor allows you to
reset the hardware of the device and perform a restart.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16