Hirschmann RS20 User Manual

Operation Diagnosis
178
9.1 Sending Traps
Basic Configuration
Release 6.0 07/2010
9.1.2 SNMP Traps during Boot
The device sends the ColdStart trap every time it boots.
hmAddressRelearnDetectT
rap
is sent when Address Relearn Detection is activated and the
threshold for the MAC addresses relearned at different ports has
been exceeded. This process very probably indicates a loop
situation in the network.
hmDuplexMismatchTrap is sent if the device has detected a potential problem with the
duplex mode of a port.
Trap name Meaning
Table 22: Possible traps

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16