Hirschmann RS20 User Manual

Loading/saving settings
58
3.1 Loading settings
Basic Configuration
Release 6.0 07/2010
3.1.4 Resetting the configuration to the state on
delivery
The device enables you to
X reset the current configuration to the state on delivery. The locally saved
configuration is kept.
X reset the device to the state on delivery. After the next restart, the IP
address is also in the state on delivery.
Setting in the system monitor
 Select 5 “Erase main configuration file”
This menu item allows you to reset the device to its state on delivery. The
device saves configurations other than the original one in its Flash
memory in the configuration file *.cfg.
 Press the Enter key to delete the configuration file.
 Select the
Basics: Load/Save dialog.
 Make your selection in the "Delete" frame.
 Click "Delete configuration".

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16