Hirschmann RS20 User Manual

Loading Software Updates
Basic Configuration
Release 6.0 07/2010
4.1 Loading the Software manually
from the ACA
65
4.1 Loading the Software
manually from the ACA
You can connect the ACA 21-USB to a USB port of your PC like a
conventional USB stick and copy the device software into the main directory
of the ACA 12-USB.
 Connect the ACA 21-USB onto which you copied the device software with
the USB port of the device.
 Open the system monitor (see page 16 “Opening the system monitor“).
 Select 2 and press the Enter key to copy the software from the ACA 21-
USB into the local memory of the device. At the end of the update, the
system monitor asks you to press any key to continue.
 Select 3 to start the new software on the device.
The system monitor offers you additional options in connection with the
software on your device:
X selecting the software to be loaded
X starting the software
X performing a cold start

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16