Access to the user interfaces
18
1.2
Command Line Interface
Basic Configuration
Release
6.0
07/2010
1.2 Command Line Interface
The Command Line Interface enables you to use the functions of the device
via a local or remote connection.
The Command Line Interface provides IT specialists with a familiar
environment for configuring IT devices.
The script compatibility of the Command Line Interface enables you, among
other things, to feed multiple devices with the same configuration data, to
create and apply partial configurations or to compare 2 configuration by
comparing the script files.
You will find a detailed description of the Command Line Interface in the
"Command Line Interface" reference manual.
You can access the Command Line Interface via
X the V.24 port (out-of-band)
X Telnet (in-band)
X SSH (in-band)
Note: To facilitate making entries, CLI gives you the option of abbreviating
keywords. Type in the beginning of a keyword. When you press the tab key,
CLI completes the keyword.
Opening the Command Line Interface
Connect the device to a terminal or to the COM port of a PC using
terminal emulation based on VT100 and press any key (see on
page 16 “Opening the system monitor“) or
call up the Command Line Interface via Telnet.
A window for entering the user name appears on the screen.
Up to five users can access the Command Line Interface.
To Next Page
Loading...
Need help?
General
