Hirschmann RS20

Entering the IP Parameters
Basic Configuration
Release 6.0 07/2010
2.4 Loading the system configuration
from the ACA
39
2.4 Loading the system
configuration from the ACA
The AutoConfiguration Adapter (ACA) is a device for
X storing the configuration data of a device and
X storing the device software.
In the case of a device becoming inoperative, the ACA makes it possible to
easily transfer the configuration data by means of a substitute device of the
same type.
When you start the device, it checks for an ACA. If it finds an ACA with a valid
password and valid software, the device loads the configuration data from
the ACA.
The password is valid if
X the password in the device matches the password in the ACA or
X the preset password is entered in the device.
To save the configuration data on the ACA(see on page 59 “Saving locally
(and on the ACA)“).