Hirschmann RS20 User Manual

Network Load Control
136
8.2 Multicast Application
Basic Configuration
Release 6.0 07/2010
Note: If the device is incorporated into a HIPER-Ring, you can use the
following settings to quickly reconfigure the network for data packets
with registered Multicast destination addresses after the ring is
switched:
X Activate GMRP on the ring ports and globally, and
X activate “Forward all groups” on the ring ports.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16