EasyManua.ls Logo

Hirschmann RS20

Hirschmann RS20
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Load Control
140
8.3
Rate Limiter
Basic Configuration
Release
6.0
07/2010
Setting options per port:
X "Ingress Packet Types" allows you to select the packet type for
which the limit is to apply:
X All, limits the total inbound data volume at this port.
X BC, limits the broadcast packets received at this port.
X BC + MC, limits broadcast packets and Multicast packets
received at this port.
X BC + MC + uUC, limits broadcast packets, Multicast packets,
and unknown Unicast packets received at this port.
X Ingress Limiter Rate for the inbound packet type selected:
X = 0, no ingress limit at this port.
X > 0, maximum inbound traffic rate in kbit/s that can be received
at this port.
X Egress Limiter Rate for broadcast packets:
X = 0, no rate limit for outbound broadcast packets at this port.
X > 0, maximum number of outbound broadcasts per second that
can be sent at this port.
X Egress Limiter Rate for the entire data stream:
X = 0, no rate limit for outbound data stream at this port.
X > 0, maximum outbound transmission rate in kbit/s sent at this
port.
Figure 36: Rate Limiter

Table of Contents

Other manuals for Hirschmann RS20

Related product manuals