Setting up the Configuration
Environment
218
A.1
Setting up a DHCP/BOOTP Ser-
ver
Basic Configuration
Release
6.0
07/2010
A.1 Setting up a DHCP/BOOTP
Server
On the CD-ROM supplied with the device you will find the software for a
DHCP server from the software development company IT-Consulting
Dr. Herbert Hanewinkel. You can test the software for 30 calendar days
from the date of the first installation, and then decide whether you want to
purchase a license.
To install the DHCP servers on your PC,
put the CD-ROM in the CD drive of your PC and
under Additional Software select "haneWIN DHCP-Server".
To carry out the installation, follow the installation assistant.
Start the DHCP Server program.
Figure 60: Start window of the DHCP server
Note: The installation procedure includes a service that is automatically
started in the basic configuration when Windows is activated. This service is
also active if the program itself has not been started. When started, the
service responds to DHCP queries.
Open the window for the program settings in the menu bar:
Options:Preferences and select the DHCP tab page.
To Next Page
Loading...
