MACH 100
Release
07/09
39
Underlying norms and standards
M-SFP-SX/LC 943 014-001
M-SFP-LX/LC 943 015-001
M-SFP-LH/LC 943 042-001
M-SFP-LH+/LC 943 049-001
Pocket Guide 280 710-851
AutoConfiguration Adapter ACA 21-USB 943 271-001
Terminal cable 943 301-001
2-pin terminal block (50 units) 943 845-010
Bracket for fastening the housing 943 943-001
HiVision Network Management software 943 471-100
Industrial HiVision Network Management software, operator edition 943 156-xxx
OPC Server software HiOPC 943 055-001
Name
EN 61000-6-2:2005 Generic norm – immunity in industrial environments
EN 55022:2006 IT equipment – radio interference characteristics
IEC/EN 60950-1:2006 Safety for the installation of IT equipment
FCC 47 CFR Part 15:2006 Code of Federal Regulations
Table 8: List of norms and standards. Certified devices are marked with a
certification indicator. From the imprint on the device label you will see the
current certification status of your device.
RFC 768 UDP RFC 1769 SNTP
RFC 783 TFTP RFC 1907 MIB2
RFC 791 IP RFC 1945 HTTP/1.0
RFC 792 ICMP RFC 2131 DHCP
RFC 793 TCP RFC 2132 DHCP Options
RFC 826 ARP RFC 2236 IGMPv2
RFC 951 BOOTP RFC 2239 MAU-MIB
RFC 1112 IGMPv1 RFC 3411 SNMP Framework
RFC 1157 SNMPv3 RFC 3412 SNMP MDP
RFC 1155 SMIv1 RFC 3413 SNMP Applications
RFC 1213 MIB2 RFC 3414 SNMP USM
RFC 1493 Dot1d RFC 3415 SNMP VACM
RFC 1542 BOOTP Extensions RFC 2613 SMON
RFC 1757 RMON RFC 2674 Dot1p/Q
Table 9: List of RFCs
Name Order number
To Next Page
Loading...
Need help?
General
