Hitachi UX2 - Page 144

120
(9) Install the cleaning station filter of accessories on the cleaning station.
NOTE
● Tighten the screw securely to prevent it from loosening. If the screw may become loose due to
vibration, the Cleaning Station may fall.
<<How to install the cleaning station filter>>
Insert the cleaning station filter so that the "" mark on the Cleaning Station and three ribs of the filter
are in the same direction. Turn and fix the screw parts of the cleaning station filter.
How to install cleaning station filter
Cleaning station filter
Screw part
Install the cleaning station filter so that the
"" mark and three ribs are in the same
direction.
Cleaning station