Hitachi UX2 - 7.1. Managing Messages

135
6.3.5.2. Setting of Automatic Circulation during Stop (S)
This section describes how to change the automatic operation period setting.
Press Safe Clean station environment setup on the [Safe clean station function] screen.
Set Operation interval in Automatic Circulation during Stop(S) .
Press OK in the upper left of the screen, and the settings are applied.
1
Improving High ink viscosity
2
Operation interval in Automatic Circulation during
Stop(S)
You can change the automatic operation period setting.
You can set any operation period in the range of 1 to 7
(days).
3