134
To finish the process, press [Abort].
（a）Press [abort] during showing the following screen, go to HOME screen with
Standby status.
※ If press [abort] during “Ink Ejection(S)” or “Cleaning Stop” is in progress, “No
cleaning stop” will run. Please clean the nozzle in print head.
（b）Press [abort] during showing the following screen, go to HOME screen with
Stop status.
●The ink viscosity will gradually change during use of this function (It is depend on ambient
temperature, usage interval of this function and ink type). If the [Ink Viscosity High] warning
occurs, perform the operation described in "6.3.7. Improving High Ink Viscosity ".
●Repeat aborting automatic circulation during stop (S) may cause thinning of ink.
Running "Ink circulation" sequence.
・ Interval is about 30 min. (Actual intervals depend on setting)
・ Current : 1st time.
Automatic Circulation during Stop(S)" sequence will run with interval.
Below shows next run time.
■2022/09/30
Current ink viscosity is below.
■ 102
To Next Page
Loading...
