● In disposing of ink, the pressure of the ink from the recovery tube may cause the waste solution
bottle to fall over. During ink disposal, prevent the ink from spilling by holding the waste solution
bottle with your hands.
● Dispose of the ink from the waste solution bottle and wash the bottle with makeup after use. If
the bottle is left uncleaned, the ink may clog and the pressure in the recovery line may rise
abnormally at the next use.
● Do not store the waste solution bottle with ink contained for a long period of time.
● Do not store the waste solution bottle at a place subject to high temperatures.
● Be careful not to spill ink when removing the joint of the waste solution bottle.
● To replace the ink filter using the waste solution bottle, connect the joint of the recovery tube to
the supplied waste solution bottle as shown in the figure below.
To Next Page
Loading...
