97
Galaxy 2 Series Installation Manual
SECTION 9: FINAL COMMISSIONING
Final system Test
Before leaving the system to the user, or after any maintenance visits, it is important that the following checks
are carried out.
1. Walk test on all zones using menu 31.
2. Communication test via menu 32 or “Full Test” via menu 62.
3. Escape out of engineer’s mode and check that all modules are configured onto the system.
User Information
Fill in the zone information at the back of the user guide and inform the user as to which optional functions are
available or not.
Final Commissioning
To Next Page
Loading...
Need help?
General
