Honeywell Galaxy 2 Series - Setting and Unsetting with Keyfobs

44
Galaxy 2 Series Installation Manual
Setting and Unsetting with Keyfobs
The following information applies when a radio receiver is connected to the system.
To Full Set the system (5804 Keyfob):
Press the ON button on the keyfob (Full
setting will commence as per keypad
procedure).
NOTE: To cancel the setting during the
exit time, press the OFF button.
To Unset the system:
Press the OFF button on the keyfob. (The
system unsets with a double beep).
Setting with Keyfobs
Begin Full
Set Procedure
Unset/Cancel
Begin Part
Set Procedure
Begin Night
Set Procedure
To Full Set the system (KTC805 Keyfob):
Press button 1 on the keyfob (Full setting will
commence as per keypad procedure).
NOTE: To cancel the setting during the exit
time, press button 2.
To Unset the system:
Press button 2 on the keyfob. (The system
unsets with a double beep).
5804 Keyfob
KTC805 Keyfob
SOS
SOS
Begin Full
Set Procedure
(Button 1)
Begin Part
Set Procedure
(Button 3)
Unset/Cancel
(Button 2)
Begin Night
Set Procedure
(Button 4)