100
Galaxy 2 Series Installation Manual
SECTION 12: PRINTER CONNECTION
The Galaxy 2 Series can print system detail directly to a serial printer. In order to do this a printer lead is
required (part number A225) to connect between the program header on the Galaxy 2 Series PCB and the
printer.
The printer must have the following settings:
• Baud Rate: 1200
• Parity: None
• Stop Bits: 2
• Data Bits: 8
• Start Bits: 1
When this has been set up, system information can be printed as per menu options 24 and 57.
Printer Connection
To Next Page
Loading...
