91
Galaxy 2 Series Installation Manual
Option 57 - System Print
This option allows the engineer to print out the system programming and diagnostic information. On entering
this option, the user is asked to confirm printing by pressing enter. Pressing enter at this point will print the
system programming via the program header to a serial printer. Pressing escape at that same point or during
printing, will abort the print command The sub-options are:
1 = System Info
2 = User Codes
3 = Parameters
4 = Zones
5 = Outputs
6 = Telecom
7 = Groups
8 = Diagnostics
9 = Event Log
10 = All
57 - System Print
To Next Page
Loading...
