52
Galaxy 2 Series Installation Manual
Table 16. User Attributes
1 = Pin
The PIN identifies each user to the Galaxy 2 Series panel and permits the user to operate the system. This
option allows a PIN to be assigned to a user or an existing PIN to be modified. The PIN must be a four, five
or six digit number that is unique to the system. If a duplicate PIN is assigned, the message DUPLICATE
ENTRY is displayed; the PIN is not assigned to the user. As each digit is entered it appears on the lower line
of the display. Pressing the * key erases the last digit displayed. When the correct PIN has been assigned,
press the ent key to accept the programming.
If the engineer PIN code has a # assigned, then the engineer can gain access by entering his PIN code twice,
without requiring user authorisation via menu 48. The first entry of the PIN code will generate a tamper alarm
on the keypad.
Menu 40 - Modify Options
Option 41 - Time/Date
This option has two sub-options:
A = Time
Selection of this sub-option allows a new time to be entered. The time must be a valid four-digit number in the
24 hour format (HH:MM). When setting the time, on pressing the last digit, the seconds will be set to 00.
B = Date
Selection of this sub-option allows a new date to be entered. The date must be a valid six-digit number in the
day/month/year format (DD/MM/YY).
Option 42 - Users
This option has one sub-option:
1 = Users
Option 1 allows scrolling through all the system users. Pressing the ent key at any point will enter into a list of
sub options for that user. The engineer code cannot access the options for user codes. Similarly, user codes
cannot access the options for the engineer code.
Modify Options
1 = PIN 4-6 digits
2 = Type Template 0-3
3 = Groups On/Off for each group * Modifier gives the user group choice
4 = Name 6 characters Entered in SMS text format
5 = RF Fob Self learn
6 = Prox Tag Self learn
7 = Duress 0 = Off, 1 = On
To Next Page
Loading...
