Honeywell Galaxy 2 Series - Setting and Unsetting with Keytags or Cards

45
Galaxy 2 Series Installation Manual
To Full Set the system (Mk 7 keyprox):
Hold keytag or card in front of prox symbol
for three seconds. (Full setting will com-
mence as per keypad procedure).
NOTE: To cancel the setting during the exit
time, hold keytag briefly in front of
prox symbol.
To Unset the system (Mk 7 keyprox):
Hold keytag briefly in front of prox symbol.
(The system unsets with a double beep).
1
2
3
A
4
5
6
B
7
8
9
ent
*
0
#
esc
Setting and Unsetting with Keytags or Cards
The following information applies to systems fitted with a keyprox.
To Full Set the system (6160 keyprox):
Hold keytag or card in front of prox symbol for
three seconds. (Full setting will commence ).
NOTE: To cancel the setting during the exit
time, hold keytag briefly in front of
prox symbol.
To Unset the system (6160 keyprox):
Hold keytag briefly in front of prox symbol.
(The system unsets with a double beep).
ARMED
READY
Keytag
Keytag or card presented to
prox reader to set and/or
unset the system
Setting with Keytags/Cards