Honeywell Galaxy 2 Series - User Types

53
Galaxy 2 Series Installation Manual
* 0 = No Access
1 = Access sub-menu 1 only
2 = Access sub-menu 1 & 2
Yes* Only if set by engineer
The engineer always has access to all menu options. However, in the codes menu the engineer can only edit
the engineer’s PIN code.
Table 17. User Types
Modify Options (cont’d)
2 = Type
This attribute shows the type of user and the level of access for each. There are four sub-options:
0 = Cleaner (L2)
1 = Users (L2)
2 = Manager (L2)
3 = Master (L3)
User Types
A user type is assigned to every user on the system. The type dictates what functions a user can access.
Each user has the following selectable attributes:
Attribute Option Assigned Attributes
Template Name Cleaner (L2) User (L2) Manager (L2) Master (L3) Installer
Restore Alarms Yes/No No Yes Yes Yes Yes
Restore Faults Yes/No No No Yes Yes Yes
Restore Tampers Yes/No No No Yes Yes Yes
S e t A c c e s s Ye s / N o Ye s Ye s Ye s Ye s Ye s
Unset Access Yes/No Yes Yes Yes Yes Yes*
Enable Level 3 Yes/No No Yes Yes Yes Yes
Change own Code Yes/No No Yes Yes Yes Yes
Change other Codes Yes/No No No No Yes No
Change SMS numbers Yes/No No No No Yes Yes
Chime Access 0, 1, 2* 0 1 2 2 2
Omit Zones Yes/No No Yes Yes Yes Yes
Override Prevent Set Yes/No No No Yes Yes Yes
Time & Date Yes/No No No Yes Yes Yes