87
Galaxy 2 Series Installation Manual
Where SMS has been programmed to send via both the PSTN and GSM modules, the panel will always try
and send using the GSM module. The PSTN module will be backup only.
1 = Mobile Nos
1 = Mobile 1
This selects the first mobile user.
1 = Mobile Number
This is a 20 digit telephone number and is the mobile phone number of the recipient of the message.
2 = Event Type
Refer to Table 26. Event types.
3 = Group Map
This option selects the system group or area from which messages will be sent.
2 = Mobile 2
As per mobile 1.
3 = Mobile 3
As per mobile 1.
2 = Centre No
This is a 20 digit telephone number and is the phone number of the SMS centre. This number is provided by
the SMS service provider and will be different for the PSTN line and GSM Module.
3 = Format (PSTN only)
This option allows message formats to be tailored for the message centre being used. The information should
be obtained from the SMS service provider. The following formats are used:
1 = Tap
This is the standard for the UK.
2 = UCP (SMS)
For alpha pagers.
3 = UCP (Numeric)
For numeric pagers.
4 = Site ID
This is a 16 character alphanumeric string and is used to identify the panel/site sending the message. If the
format is UCP (numeric), then the site ID is numeric. Only the first four characters are sent out.
56 - Comms (cont’d)
To Next Page
Loading...
Need help?
General
