Honeywell RP2F Series - Reserve the Printer

in uppercase letters. Do not include spaces between data unless they are part of the
data.
In this example, if you send this command:
ESC{SBT:D:N}{COMMIT}{LP}
You receive this reply:
{SBT:D:0}
This table lists the available Bluetooth commands.
Command Syntax
Reserve the Printer ESC{SBT:B}
Retrieve Bluetooth Passcode ESC{QST:BP}
Retrieve Bluetooth Settings ESC{QST:BA}
Retrieve Firmware Version (Bluetooth) ESC{QST:RV}
Retrieve MAC Address ESC{QST:MA}
Set Authentication (Bluetooth) ESC{SBT:A}
Set Encryption ESC{SBT:E}
Set Passcode ESC{SBT:P}
Set the Connectable State ESC{SBT:C}
Set the Device Name ESC{SBT:F}
Set the Discoverable State ESC{SBT:D}
Reserve the Printer
Enables the printer to pair exclusively with another Bluetooth device. The first
Bluetooth device that attempts to establish a relationship with your printer is paired
exclusively with the device.
Command
ESC{SBT:B:x}ESC EZ{COMMIT}{LP}
where:
x is either Y (Yes) or N (No).
Example
This command enables the printer to be paired exclusively with another Bluetooth
device.
ESC{SBT:B:Y}ESC EZ{COMMIT}{LP}
Returns this reply when the printer is successfully enabled:
8 EZ-Print Command Reference