Retrieval of WEP keys will return an empty string if not configured and ”****” if a value
was previously set.
Example 1
ESC{SWF:K1:0x1138170147}
ESC{SWF:K2:Spock}
ESC{SWF:K3:0x123456789abcdef0123456789a}
ESC{SWF:K4:Vulcanologist}
ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:K1:1}
{SWF:K2:1}
{SWF:K3:1}
{SWF:K4:1}
Returns this reply if the command is successful:
{SWF:K1:0}
{SWF:K2:0}
{SWF:K3:0}
{SWF:K4:0}
Example 2
ESC{SWF:K1:}
Returns this reply if the command is not successful:
{SWF:K1:1}
Returns this reply if the command is successful:
{SWF:K1:0}
Set WPA
WPA (Wi-Fi Protected Access) Setting enables WPA security for the printer. The WPA is
a subset of the IEEE 802.11i Standard and uses TKIP (Temporal Key Integrity
Protocol) for encryption.
Only users with administrative privileges can set this command.
Command
ESC{SWF:W:<sexp>}ESC EZ{COMMIT}{LP}
60 EZ-Print Command Reference
To Next Page
Loading...
