Honeywell RP2F Series - Set Dark Adjust

Example
This command retrieves the values of the sleep and standby timers. The sleep timer is
set for 20 seconds and the standby timer is set for 30 minutes.
<ESC>{QST:PW}
Reply:
{QST:PW:20,30}
Set Dark Adjust
Sets the energy level for the printhead which controls how dark the print appears on the media.
Command
ESC{SSC:E:F1,F2}
where:
F1: The printhead Manufacturer ID. The printer supports K, S, and R.
F2: Sets the energy level for the printhead:
l
80 (lightest)
l
90
l
100 (default)
l
110
l
120
l
130
l
160 (darkest)
Example
This command sets the dark adjust on the printer to 100.
SC{SSC:E:S,100}
Returns this reply if the command is not successful:
{SSC:E:1}
Returns this reply if the command is successful:
{SSC:E:0}
68 EZ-Print Command Reference