Honeywell RP2F Series - Set SSID

{SWF:SCN1:0}
Set Server Common Name 2
Sets the server common name used for Server Certificate Validation. If Set Server
Common Name 1 is not set, Server Common Name 2 is used. If Server Common Name
2 is also not set, any common name is accepted.
Only users with administrative privileges can set this command.
Command
ESC{SWF:SCN2:<sexp>}ESC EZ{COMMIT}{LP}
where:
<sexp> is a valid Server Common Name value.
Example
ESC{SWF:SCN2:Moria2}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:SCN2:1}
Returns this reply if the command is successful:
{SWF:SCN2:0}
Set SSID
Sets the Service Set Identifier (SSID) or network name that differentiates one network
from another in a wireless network.
Only users with administrative privileges can set this command.
Command
ESC{SWF:E:<sexp>}ESC EZ{COMMIT}{LP}
where:
<sexp> is an SSID name.
Example
ESC{SWF:E:milkyway}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:E:1}
Returns this reply if the command is successful:
56 EZ-Print Command Reference