Honeywell RP2F Series - Set PS Name; Set TCP Port Number

Example
This command sets the mask number to "255.255.255.0."
ESC{SWF:M:255.255.255.0}
Returns this reply if the command is not successful:
{SWF:M:1}
Returns this reply if the command is successful:
{SWF:M:0}
Set PS Name
Sets the WINS name.
Only users with administrative privileges can set this command.
Command
ESC{SWF:N:x}
where:
x is a string. The default value is "INTERMEC" followed by the last three bytes of the
MAC address.
Example
This command sets the WINS name to "Portable Printer."
ESC{SWF:N:Portable Printer}
Returns this reply if the command is not successful:
{SWF:N:1}
Returns this reply if the command is successful:
{SWF:N:0}
Set TCP Port Number
Sets the raw TCP (Transmission Control Protocol) port number.
Only users with administrative privileges can set this command.
Command
ESC{SWF:P:x}
where:
x has a default value of 9100.
34 EZ-Print Command Reference