Honeywell RP2F Series - Easy Print Mode Commands; Ahead Command Format; Back Command Format

where:
x is either Y (Yes) or N (No).
Example
This command sets the printer to a state in which it is not discoverable.
ESC{SBT:D:N}ESC EZ{COMMIT}{LP}
Returns this reply when the state is successfully set:
{SBT:D:0}
Easy Print Mode Commands
In addition to the Print Command Format, these Easy Print mode commands are
available.
Command Syntax
Ahead Command Format {AHEAD:nnn}
Back Command Format {BACK:nnn}
Commit Command Format {COMMIT}
Line Print Mode {LP}
Media Command Format {MEDIA:MTYP xxx,TMAR xx,BMAR
xx,CUTP xx}
Print Command Format {PRINT, Global Options:@row,-
column:Name,Field Options|data|}
Self Test Printout {TP}
Ahead Command Format
Advances the paper by a specified number of dotlines.
Command
{AHEAD:nnn}
where:
nnn is a number from 1 to 65000.
Back Command Format
Retracts the paper a specified number of dotlines which enables the printer to print
on paper previously fed past the printing mechanism.
Command
{BACK:nnn}
EZ-Print Command Reference 13