Command Setting Description
SECURITY x Specifies the level of error detection and correction codes, from 1 to 8. If
you do not specify the code, the printer will use a default value determ-
ined by the number of data characters you use:
l
1 to 40 characters = level 2
l
41 to 160 characters = level 3
l
161 to 320 characters = level 4
l
321 to 863 characters = level 5
Error detection and correction characters vary with different security
levels.
l
Level 1 adds 4 codewords
l
Level 2 adds 8 codewords
l
Level 3 adds 16 codewords
l
Level 4 adds 32 codewords
l
Level 5 adds 64 codewords
l
Level 6 adds 128 codewords
l
Level 7 adds 256 codewords
l
Level 8 adds 512 codewords
|.....| data Enter the data between two "|" characters. If the data is long, do not use
the CR/LF characters unless you want them to be part of the barcode
string. You can use a maximum of 1848 characters.
Example
This example prints a PDF417 barcode that is 0.30 inches high, 0.010 inches wide,
with each row containing 2 data byes, an error correction level of 3, and data of
ABCDEDGHIJKL.
{PRINT:@75,10:PD417,YDIM 6,XDIM 2,COLUMNS 2,SECURITY 3|ABCDEFGHIJKL|}
Font Names
Specifies the name of the font that you want your text to use for printing. Each font
has a five-character name.
Command
Font Name Description
ARABS Arabic CP1256 10x16
ARABB Arabic CP1256 14x24
CYRLS Cyrillic 1251 10x16
20 EZ-Print Command Reference
To Next Page
Loading...
Need help?
General
