Honeywell RP2F Series - Set Encryption; Set Passcode

x is either Yes (Y) or No (N).
Example
This command enables authentication.
ESC{SBT:A:Y}ESC EZ{COMMIT}{LP}
Returns this reply when authentication is successfully enabled:
{SBT:A:0}
Set Encryption
Enables or disables encryption, which encodes data to prevent others from being able
to interpret the information.
Command
ESC{SBT:E:x}ESC EZ{COMMIT}{LP}
where:
x is either Y (Yes) or N (No).
Example
This command enables encryption.
ESC{SBT:E:Y}ESC EZ{COMMIT}{LP}
Returns this reply when encryption is successfully enabled:
{SBT:E:0}
Set Passcode
Sets the Bluetooth passcode for the printer.
Command
ESC{SBT:P:x...x}ESC EZ{COMMIT}{LP}
where:
x...x is up to 16 printable ASCII code characters.
Example
This command sets the passcode on your printer.
ESC{SBT:P:123456}ESC EZ{COMMIT}{LP}
Returns this reply when the passcode is successfully set:
{SBT:P:0}
EZ-Print Command Reference 11