Honeywell RP2F Series - Set Server Common Name 1

The Roaming values have a Roaming delta of 5 dBm.
Example 1
This command disables roaming behavior.
ESC{SWF:R:0}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:R:1}
Returns this reply if the command is successful:
{SWF:R:0}
Example 2
This command signals the printer to begin roaming at -60 dBm.
ESC{SWF:R:1}
Returns this reply if the command is not successful:
{SWF:R:1}
Returns this reply if the command is successful:
{SWF:R:0}
Set Server Common Name 1
Sets the server common name used for Server Certificate Validation. If Server
Common Name 1 is not set, Server Common Name 2 is used. If Server Common
Name 2 is also not set, any common name is accepted.
Only users with administrative privileges can set this command.
Command
ESC{SWF:SCN1:<sexp>}ESC EZ{COMMIT}{LP}
where:
<sexp> is a valid Server Common Name value.
Example
ESC{SWF:SCN1:Moria1}ESC EZ{COMMIT}{LP}
Returns this reply if the command is not successful:
{SWF:SCN1:1}
Returns this reply if the command is successful:
EZ-Print Command Reference 55