EZ-PRINT COMMAND
REFERENCE
This command reference includes general information and command and parameter
information to write programs for your Honeywell RP2f or RP4f Mobile Printer.
About the Print Modes, Graphics, and Fonts
The printers can operate in two modes:
Line Print mode (default)
Easy Print mode
About Line Print Mode
Line Print mode is the simplest method of printing. Each line to be printed is sent to
the printer as a sequence of single bytes. (Some Asian character sets require two
bytes for each character.) The printer accepts characters and begins to print when a
Carriage Return (0x0D) or Line Feed (0x0A) is received, and then all characters
received to that point are printed on a single line. A series of ESC (Escape) code
sequences can be sent to the printer to alter the look of the characters (e.g., to make
them double wide, change the font, change other aspects of the appearance of the
printout). You can also have the printer realign if you are using stocks with a "Q" or
alignment mark. Text and graphics do not need to be stored in the printer.
You can use Line Print mode commands to change the text height, width, font type,
and international character type.
Example
Receipt
Item #1 - yellow version $1.00
Item #2 - blue version $1.00
Item #3 - red version $1.00
Total: $3.00
EZ-Print Command Reference 1
CHAPTER
1
To Next Page
Loading...
Need help?
General
