where:
nnn is a number from 1 to 65000.
Example
{PRINT,BACK50:@10,30:PB203|Hi world|}
Commit Command Format
Causes settings to take effect only after the printer receives this command. Until the
printer receives the {COMMIT} command, the settings are cached into memory where
you can change or undo them.
Command
{COMMIT}
You must send the {COMMIT} command to invoke all of the Bluetooth commands.
Example
ESC{SSC:S:115200,8,N,1,H}ESC EZ{COMMIT}{LP}
where:
ESC{SSC:S:115200,8,N,1,H} sets the serial port parameters.
ESC EZ{COMMIT} invokes the serial port parameters command.
{LP} returns the printer to the default Line Print mode.
Line Print Mode
Puts the printer in Line Print Mode.
Command
{LP}
See Also
Line Print Mode Commands
Media Command Format
Sets the printer to fanfold media mode, sets the size in inches, and resets the printer
to roll media mode. You can also use this command to set black mark or continuous
media mode.
Command
{MEDIA:MTYP xxx,TMAR xx,BMAR xx,CUTP xx}
14 EZ-Print Command Reference
To Next Page
Loading...
Need help?
General
