Setting Default
Data bits 8
Parity None
Stop bits 1
Flow control Hardware
Bluetooth
Device name PR2/PR3-xxxxxxxxxxx (where xxxxxxxxxxx is the serial number)
Service name Wireless printer
Class of device 00040680
Discoverable Yes
Connectable Yes
Authentication Off
Encryption Off
Printer reserve Disabled
Battery
Low battery indicator 7.4 V
Allow messages from printer Off
Dark adjust 100
Media sensitivity 0
Retrieve Firmware Version
Retrieves firmware information from the printer.
Command
ESC{QST:VR}
Example
ESC{QST:VR}
Reply:
{QST:VR:PR2SNNNNN_MMDDYY(Firmware Version)}
where:
NNNNN is the simulator version.
MMDDYY is the month, day, and year of the simulator build.
Firmware Version is the underlayer firmware version.
EZ-Print Command Reference 65
To Next Page
Loading...
Need help?
General
