Honeywell RP2F Series - Set the Connectable State; Set the Device Name; Set the Discoverable State

Set the Connectable State
Allows other Bluetooth devices to connect to your printer.
Command
ESC{SBT:C:x}ESC EZ{COMMIT}{LP}
where:
x is either Y (Yes) or N (No).
Example
This command sets the printer to a state in which other Bluetooth devices can
connect to it.
ESC{SBT:C:Y}ESC EZ{COMMIT}{LP}
Returns this reply when the connectable state is successfully set:
{SBT:C:0}
Set the Device Name
Assigns a "friendly" name to your printer.
Command
ESC{SBT:F:x...x}ESC EZ{COMMIT}{LP}
where:
x...x is an alphanumeric string up to 16 characters. You can have spaces between the
characters.
Example
This command sets the device name to "My PR2".
ESC{SBT:F:My PR2}ESC EZ{COMMIT}{LP}
Returns this reply when the device name is successfully set:
{SBT:F:0}
Set the Discoverable State
Allows other Bluetooth devices to discover your printer during a device discovery.
Command
ESC{SBT:D:x}ESC EZ{COMMIT}{LP}
12 EZ-Print Command Reference