You need to put the printer in Easy Print mode to use this command.
Command
QSTOPnnn
where:
nnn is a number from 1 to 65000.
Example
EZ{PRINT,QSTOP500:@50,30:PE203,HMULT3,VMULT3|Hi world|}{LP}
QUANTITY
Allows you to specify how many copies of a label or receipt to print.
Command
QUANTITYnnn
where:
nnn is a number from 1 to 999.
Example
{PRINT,QUANTITY5:@10,30:PB203|Hi world|}
ROTATION
Rotates the printout 270° counterclockwise.
Command
ROT270
Example
{PRINT,QUANTITY5,ROT270:@10,30:PB203|Hi world|}
STOP
Advances the media to the correct place for tearing. The command stops the media
nnn dotlines after the beginning of the receipt. The data sent after the STOP
command specifies the total number of dot lines high for this print image.
You can use the STOP command with the QSTOP option to make sure that the printer
stops advancing media.
Command
STOPnnn
where:
EZ-Print Command Reference 17
To Next Page
Loading...
Need help?
General
