HP 50G

Page 12-32
Θ Press @ERASE @DRAW to draw the bar plot. Press @EDIT L @LABEL @MENU to see
the plot unencumbered by the menu and with identifying labels (the cursor
will be in the middle of the plot, however):
Θ Press LL@)PICT to leave the EDIT environment.
Θ Press @CANCL to return to the PLOT WINDOW environment. Then, press
$ , or L@@@OK@@@, to return to normal calculator display.
To plot y vs. z, use:
Θ Press „ô, simultaneously if in RPN mode, to access to the PLOT SETUP
window.
Θ Press ˜˜ to highlight the
Cols: field. Enter 3@@@OK@@@ 2@@@OK@@@ to
select column 3 as X and column 2 as Y in the Y-vs.-X scatter plot.
Θ Press L@@@OK@@@ to return to normal calculator display.
Θ Press „ò, simultaneously if in RPN mode, to access the PLOT
WINDOW screen.
Θ Change the plot window ranges to read:
H-View: 0 7, V-View: 0 7.
Θ Press @ERASE @DRAW to draw the bar plot. Press @EDIT L @LABEL @MENU to see
the plot unencumbered by the menu and with identifying labels.
Θ Press LL@)PICT to leave the EDIT environment.
Θ Press @CANCL to return to the PLOT WINDOW environment. Then, press
$ , or L@@@OK@@@, to return to normal calculator display.