HP 50G User Manual

Page 21-65
If you enter “TRY AGAIN” ` @DOERR, produces the following message: TRY
AGAIN
Finally, 0` @DOERR, produces the message: Interrupted
ERRN
This function returns a number representing the most recent error. For example,
if you try 0Y$@ERRN, you get the number #305h. This is the binary
integer representing the error: Infinite Result
ERRM
This function returns a character string representing the error message of the
most recent error. For example, in Approx mode, if you try 0Y$@ERRM,
you get the following string: “Infinite Result”
ERR0
This function clears the last error number, so that, executing ERRN afterwards, in
Approx mode, will return # 0h. For example, if you try 0Y$@ERR0 @ERRN,
you get # 0h. Also, if you try 0Y$@ERR0 @ERRM, you get the empty string
“ “.
LASTARG
This function returns copies of the arguments of the command or function
executed most recently. For example, in RPN mode, if you use: 3/
2`, and then use function LASTARG (@LASTA), you will get the values 3 and
2 listed in the stack. Another example, in RPN mode, is the following:
5U`. Using LASTARG after these entries produces a 5.
Sub-menu IFERR
The @)IFERR sub-menu provides the following functions:

HP 50G Specifications

General

Digits	33 digits
Battery type	CR2032
Type	Scientific
Form factor	Pocket

Weight and Dimensions

Weight	220 g
Dimensions (WxDxH)	87 x 184 x 23.5 mm