HP 5130 EI series User Manual

21
Ste
p
Command Remarks
2. Enter AUX line
view or class view.
• Enter AUX line view:
line aux first-number
[ last-number ]
• Enter AUX line class view:
line class aux
A setting in user line view is applied only to
the user line. A setting in user line class view
is applied to all user lines of the class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user line
view takes precedence over a non-default
setting in user line class view.
A setting in user line view takes effect
immediately and affects the online user. A
setting in user line class view does not affect
online users and takes effect only for users
who log in after the configuration is
completed.
3. Disable
authentication.
authentication-mode none
By default, authentication is disabled for the
AUX line.
4. Assign a user role.
user-role role-name
By default, an AUX line user is assigned the
user role network-admin.
The next time you log in through the console port, you do not need to provide any username or password.
Configuring password authentication for console login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter AUX line view or
class view.
• Enter AUX line view:
line aux first-number
[ last-number ]
• Enter AUX line class view:
line class aux
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user
lines of the class.
A non-default setting in either view
takes precedence over a default
setting in the other view. A
non-default setting in user line view
takes precedence over a non-default
setting in user line class view.
A setting in user line view takes effect
immediately and affects the online
user. A setting in user line class view
does not affect online users and takes
effect only for users who log in after
the configuration is completed.
3. Enable password
authentication.
authentication-mode password
By default, authentication is disabled
for the AUX line.
4. Set a password.
set authentication password { hash |
simple } password
By default, no password is set.
5. Assign a user role.
user-role role-name
By default, an AUX line user is
assigned the user role
network-admin.

HP 5130 EI series Specifications

General

Layer	Layer 3
VLANs	4094
Multicast Protocols	IGMP, PIM
Operating Temperature	0°C to 45°C
Model	HP 5130 EI
Ports	24 or 48 10/100/1000 ports
Uplink Ports	4 x 1/10G SFP+
Stacking	Up to 9 switches
Power over Ethernet (PoE)	PoE+ (IEEE 802.3at) on PoE+ models (JG936A, JG937A)
Management	Web, CLI, SNMP
MAC Address Table Size	32, 000 entries
Routing Protocols	OSPF, RIP, BGP, static routing
Operating Humidity	10% to 90% (non-condensing)