HP 530 User Manual

5-30
General System Configuration
Configuring SNMP
The following example shows how to configure the SNMP community strings,
the community name (using the server host command), and the following
parameters (contact, port, and location). The default port number is 161.
NOTE Although you can set this string using the snmp-server host command by itself,
we recommend that you define this string using the snmp-server community
command prior to using the snmp-server host command.
To display the current SNMP settings, use the show snmp-server command, as
shown in the following example.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config) #snmp-server community
alpha unrestricted
ProCurve Access Point 530(config) #snmp-server community
beta restricted
ProCurve Access Point 530(config) #snmp-server host 192.16
8.1.15 alpha
ProCurve Access Point 530(config) #snmp-server contact Jim
ProCurve Access Point 530(config) #snmp-server location 2F
R19
ProCurve Access Point 530(config) #snmp-server port 161
ProCurve Access Point 530(config) #

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g