HP 530 User Manual

7-66
Wireless Security Configuration
Web Authentication for Mobile Users
Configuring the global Address Pool on the access point. The follow-
ing example configures a range of temporary IP addresses with 60 second
leases.
Web: Configuring Global Guest Account Settings
The Web Authentication – Guest Account screen shown in Figure 7-18 config-
ures global Guest User credentials for Web-Auth guest users.
You can modify these parameters:
■ Username: Specifies the username used for all Guest users.
■ Password: Specifies the password used for all Guest users
■ [Update]: Updates the global Guest Account credentials.
Figure 7-18. Configuring Guest Account Credentials
To Configure the global Guest User credentials:
1. Select Web Authentication > Guest Account tab.
2. Enter the username to be assigned to all Guest users in the Username
field.
ProCurve Access Point 530(config)# web-auth starting-ip-address 192.168.0.1
255.255.240.0
ProCurve Access Point 530(config)# web-auth lease-time 60
ProCurve Access Point 530(config)# show web-auth
Temporary Address Pool Start 192.168.0.1
Subnet 255.255.240.0
Lease time (secs.) 60
Guest Username not set
Guest Username not set

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g