HP 530 - Rsn-Preauthentication

9-136
Command Line Reference
Wireless Security Commands
Command Mode
WLAN Interface Configuration
Example
rsn-preauthentication
This command enables WPA2 stations to pre-authenticate on this WLAN. The
no version of the command disables WPA2 stations from being able to pre-
authenticate.
Syntax
rsn-preauthentication
no rsn-preauthentication
Default Setting
Disabled
Command Mode
WLAN Interface Configuration
Example
ProCurve Access Point 530(radio1-wlan1)# wpa-psk-hex
ProCurve Access Point 530(radio1-wlan1)#
ProCurve Access Point 530(radio1-wlan1)# rsn-
preauthentication
ProCurve Access Point 530(radio1-wlan1)#