4-11
Using the ProCurve Web Browser Interface
Web Interface Screens
Device Information Summary
The Device Information summary screen is primarily informational, but also
serves as the configuration screen for basic system information (as described
in “Web: Setting the System Name, Location, and Contact” on page 5-15).
Figure 4-6. The Device Information Summary Screen
The Device Information screen displays the basic system configuration
settings:
■ System Name: The name assigned to this access point. Modifiable field.
■ Location: The access point’s assigned location. Modifiable field. Max
length of 255 characters.
■ Contact: Administrator responsible for the system. Modifiable field. Max
length of 255 characters.
■ IP Address: IP address of the management interface for this device.
■ MAC Address: The physical layer address for the Ethernet port interface.
■ Software Version: The version number for the runtime software.
■ Serial Number: The serial number of the access point.
■ Country Code: The access point’s current Country Code setting.
■ System Up Time: Length of time the access point has been up (days,
hours, minutes, seconds).
■ [Update]: Updates the access point with the modifiable parameters.
To Next Page
Loading...
Need help?
General
