HP 530 User Manual

9-38
Command Line Reference
Network Management Application Commands
snmp-server community restricted | unrestricted
This command defines the community access string for the read-only or read-
write access Simple Network Management Protocol. Use the no form to
remove the specified community string.
Syntax
snmp-server < community <comm> <restricted | unrestricted >
no snmp-server community <comm> <restricted | unrestricted >
• comm - Community string that denotes it as private.
• restricted - Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects. The no version of the
command clears the read-only community value.
• unrestricted - Specifies read-write access. Authorized management
stations are only able to retrieve MIB objects. The no version of the
command clears the read-write community value.
Default Setting
Restricted community with a public access default.
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# no snmp-server community
<public> restricted
ProCurve Access Point 530(config)# no snmp-server community
<system> unrestricted
ProCurve Access Point 530(config)#

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g